• img1
  • img2
  • img3



Product Categories

Contact Us

Shandong Jining Qingfeng Machinery Hardware Co.,Ltd

Add: NO.47 Jinyu Road, Jining, Shandong

Contact: Qin Wang

Tel: +86-537-3281595

Fax: +86-537-3281597

Mobile: +8613705473076


Web: www.qfmh-tools.com

Home > Knowledge > Content
CNC 5-axis centerless grinding machine feeder function and its working principle

The CNC 5-axis centerless grinder feeder consists of a high-hydraulic-pressure CNC 5-axis centerless grinder and a special-purpose feeder to realize automatic grinding of workpieces. Through matching with the system, combined with domestic and international grinder control technology and field experience design system program, it has the function of grinding wheel consumption and automatic compensation after trimming, and setting experience parameters to adjust the feed amount of the table to adjust the outer diameter size of the workpiece and control the workpiece Geometry accuracy. At the same time, it has the functions of counting statistics, alarming before the dressing wheel, first stop (detection) after the grinding wheel, and continuous function.


This centerless grinder feeder has a wealth of alarm protection features, guide users to handle simple fault handling, simplify the complex procedures, professional control interface, simple processing parameters, non-professionals can also be competent for processing and production. Reduce professional investment in human resources and reduce human resource costs. Sending and receiving method adopts step-by-step feeding receiver, and the workpiece is sent to the grinding position by the robot. The feeder is set to manually adjust the screw. After the grinding wheel is worn, the screw can be manually adjusted to adjust the position of the workpiece to fit the gripper.

After the centerless grinder feeding machine moves the workpiece in the area to be ground to the grinding position by the robot hand, the feeding cylinder is moved to top the workpiece in the working area to the position to be clamped. When the workpiece is clamped in the storage area, the storage area is Move, the next stored workpiece area reaches the position to be clamped, reciprocating cycle. The gripper position of the robot can be adjusted and the length of the workpiece can be clamped in the range of 60-70mm. After one end of the workpiece has been ground, the robot clamps the workpiece to the rotary mechanism. After the rotary mechanism rotates the workpiece, the robot grips the workpiece to the grinding position and grinds the other end of the workpiece.

Contact Us
Shandong Jining Qingfeng Machinery Hardware Co.,Ltd

Address: NO.47 Jinyu Road, Jining, Shandong

Tel: +86-537-3281595

Fax: +86-537-3281597

E-mail: info@qfmh.com

Copyright © Shandong Jining Qingfeng Machinery Hardware Co.,Ltd All Rights Reserved.